3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.68
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
setsnmppw
DESCRIPTION
The setsnmppw command allows a user to update SNMP access community strings passwords.
The SNMP password is required for the system manager to send requests to the SNMP agent.
SYNTAX
setsnmppw [options] <password>
AUTHORITY
Super
OPTIONS
–rw|–r|–w
Specifies that the read-write (–rw), read-only (–r), or write-only (–w) community password
is changed. If not specified, the read/write password is changed.
SPECIFIERS
<password>
Specifies the new user-defined password using up to 50 alphanumeric characters.
RESTRICTIONS
Access to all domains is required to run this command.
EXAMPLES
The following example changes the read/write SNMP community string password to
newpassword1:
NOTE: You need access to all domains in order to run this command.
cli% setsnmppw newpassword1