3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.64

Command Line Interface Reference InForm OS Version 2.3.1

The measured round-trip latency of the connection to the target, specified in milliseconds

(ms). This specifier can only be used with the

tunelinks subcommand.

RESTRICTIONS

■ Access to all domains is required to run this command.

■ This command requires the 3PAR Remote Copy license. Contact your local service provider

for more information.

■ If the mirror_config policy is set and the setrcopytarget command is issued with the

pol subcommand, the duplicated configuration commands cannot be issued on the

secondary. Doing so results in an error.

■ There must be an active connection between the systems in the Remote Copy pair to issue

commands on the primary to be mirrored to the secondary. If there is no connection, the

commands return an error.

EXAMPLES

The following example will set the throughput of each link of target InservB to 5 megabytes

per second:

NOTES

■ The setrcopytarget command requires the groups associated with it be stopped prior to

using the following options:

◆ setrcopytarget name <new_name> <target_name>

◆ setrcopytarget tput <throughput> <target_name>

The setrcopytarget command with the following arguments can be run without

bringing down its Remote Copy groups:

◆ setrcopytarget pol <policy> <target_name>

◆ setrcopytarget tunelinks <bandwidth> <latency> <target_name>

cli% setrcopytarget tput 5M InServB