3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.62
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
setrcopytarget
DESCRIPTION
The setrcopytarget command sets the name, policies, and throughput of a target
definition.
SYNTAX
The syntax for the setrcopytarget command can be one of the following:
■ setrcopytarget pol <policy> <target_name>
■ setrcopytarget name <new_name> <target_name>
■ setrcopytarget tput <tput_value> <target_name>
■ setrcopytarget tunelinks <bandwidth> <latency> <target_name>
■ setrcopytarget enable|disable <target_name>
AUTHORITY
Super, Edit
SUBCOMMANDS
pol
Sets the policy for the specified target using the <policy> specifier.
name
Changes the name of the indicated target using the <new_name> specifier.
tput
Sets the maximum throughput value for the target's links.
tunelinks
Adjust performance values for the target's links using the <bandwidth> and <latency>
specifiers.
NOTE: You need access to all domains in order to run this command.