3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

3.10
Node Subsystem Management Commands
Command Line Interface Reference InForm OS Version 2.3.1
3.9.5 Array and Node Information
3.9.6 Network Interface Configuration
Command Description Authority For Details See
locatesys Locates a system by
blinking its LEDs.
Super, Service
*
* You need access to all domains in order to run this command.
locatesys on
page 16.4
setsys
Enables you to set
system-wide parameters
such as the raw space
alert.
Super, Service* setsys on
page 21.75
showsys Displays the InServ
system properties,
including system name,
model, serial number,
and system capacity.
Super, Service, Edit,
Browse
showsys on
page 22.171
Command Description Authority For Details See
setnet
Sets the administration
network interface
configuration.
Super, Service
*
* You need access to all domains in order to run this command.
setnet on
page 21.42
setntp
Sets the NTP server to
which the InServ Storage
Server synchronizes.
Super, Service* setntp on
page 21.49
shownet
Displays the network
configuration and status.
Super, Service, Edit,
Browse
shownet on
page 22.75