3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.53
InForm OS Version 2.3.1 Command Line Interface Reference
COMMAND
setpd
DESCRIPTION
The setpd command marks a Physical Disk (PD) as allocatable or non allocatable for Logical
Disks (LDs).
SYNTAX
setpd ldalloc on|off <PD_ID>...
AUTHORITY
Super, Service
SUBCOMMANDS
ldalloc on|off
Specifies that the PD, as indicated with the PD_ID specifier, is either allocatable (on) or
nonallocatable for LDs (
off).
OPTIONS
None.
SPECIFIERS
<PD_ID>...
Specifies the PD identification using an integer.
RESTRICTIONS
Access to all domains is required to run this command.
EXAMPLES
The following example displays PD 0 marked as non allocatable for LDs.
NOTE: You need access to all domains in order to run this command.
cli% setpd ldalloc off 0