3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.47
InForm OS Version 2.3.1 Command Line Interface Reference
COMMAND
setnode
DESCRIPTION
The setnode command sets the properties of the node components such as the serial number
of the power supply.
AUTHORITY
Super, Service
SYNTAX
setnode ps <PS_ID> [options] <node_ID>
SUBCOMMAND
ps
Sets the power supply properties.
OPTIONS
-s <serial_number>
Specifies the serial number up to eight characters in length.
SPECIFIERS
<PS_ID>
Specifies the power supply ID.
<node_ID>
Specifies the node ID.
RESTRICTIONS
■ Access to all domains is required to run this command.
■ At least one option must be specified.
NOTE: You need access to all domains in order to run this command.