3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.41
InForm OS Version 2.3.1 Command Line Interface Reference
EXAMPLES
The following example displays the setting of a license key:
NOTES
■ This command prompts for a new license key. To finish entering the license key, press ENTER
on a blank line.
■ When the license key is being interpreted, all characters other than letters (without case-
sensitivity) and numbers are ignored, and the letters are not case-sensitive.
■ After the new license key has been entered, the changes between the existing license key
and the new license key are displayed. There is a prompt to confirm the changes unless the
–
noconfirm option is given, in which case the information is not displayed, and the new
license key is entered immediately.
cli% setlicense
If this software is being provided to you for a limited evaluation period,
then your license shall be governed by the terms of 3PAR's standard Master
Purchase and License Agreement which can be found at http://www.3par.com/
mpla (or as otherwise agreed between us) with the exception that the term of
the license shall expire upon the earlier of the evaluation period notified
to you or 120 days. Upon expiration of the license, you must cease using the
software and 3PAR reserves the right to disable the software without notice.
By using or activating the software you are agreeing to these terms.
Do you agree to these terms and conditions? y=yes n=no: yes
Please enter the new license key below. When finished, press enter twice. If
the key is entered by hand, note that characters other than letters and
numbers are ignored, and the key is not case-sensitive.
60R3–0C1G...