3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.35
InForm OS Version 2.3.1 Command Line Interface Reference
COMMAND
sethost
DESCRIPTION
The sethost command sets properties on existing system hosts, including options to annotate
a host with descriptor information such as physical location, IP address, operating system,
model, and so on. The command also provides the ability to configure or remove iSCSI CHAP
authentication information.
SYNTAX
The syntax for the sethost command can be one of the following:
■ sethost [options <arg>] <host_name>
■ sethost initchap [-f] [options <arg>] <secret>
{<host_name>|<pattern>}...
■ sethost targetchap [-f] [options <arg>] <secret>
{<host_name>|<pattern>}...
■ sethost removechap [-target] [-f] {<host_name>|<pattern>}...
■ sethost clearagent <WWN|iscsi_name>
AUTHORITY
Super, Edit
SUBCOMMANDS
initchap
Sets the initiator CHAP authentication information on one or more hosts.
targetchap
Sets the target CHAP authentication information on one or more hosts.
NOTE: You need access to all domains in order to run this command.