3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.31
InForm OS Version 2.3.1 Command Line Interface Reference
COMMAND
setdomain
DESCRIPTION
The setdomain command sets the parameters and modifies the properties of a domain.
SYNTAX
setdomain [options <arg>] <domain_name>
AUTHORITY
Super
OPTIONS
-name <name>
Changes the name of the domain.
-comment <comment>
Specifies comments or additional information for the domain. The comment can be up to
511 characters long and must be enclosed in quotation marks. Unprintable characters are
not allowed within the
<comment> specifier.
-vvretentiontimemax <value>[h|H|d|D]
Specifies the maximum value that can be set for the retention time of a volume in this
domain.
<time> is a positive integer value and in the range of 0 - 43,800 hours
(1,825 days). Time can be optionally specified in days or hours providing either
d or D for
day and
h or H for hours following the entered time value.
To remove the maximum volume retention time for the domain,
enter
-vvretentiontimemax " ". As the result, the maximum volume retention time
for the system is used instead.
To disable setting the volume retention time in the domain, enter 0 for
<time>.
NOTE: You need access to all domains in order to run this command.