3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.24
Command Line Interface Reference InForm OS Version 2.3.1
–mg <item>
Specifies one or more drive magazines. The 1. or 0. displayed in the CagePos
column of
showpd output indicating the side of the cage is omitted when using
-mg option. Drive magazines are identified by one or more integers (item). Multiple
drive magazines are separated with a single comma (
1,2,3). A range of drive
magazines is separated with a hyphen (
0–3). The specified drive magazine(s) must
contain disks.
–pn <item>
Specifies one or more disk positions within a drive magazine. Disk positions are
identified by one or more integers (
item). Multiple disk positions are separated
with a single comma (
1,2,3). A range of disk positions is separated with a hyphen
(
0–3). The specified position(s) must contain disks.
–dk <item>
Specifies one or more physical disks. Disks are identified by one or more integers
(
item). Multiple disks are separated with a single comma (1,2,3). A range of disks
is separated with a hyphen (
0–3). Disks must match the specified ID(s).
–tc_gt <number>
Specifies that physical disks with total chunklets greater than the number specified
are selected.
–tc_lt <number>
Specifies that physical disks with total chunklets less than the number specified are
selected.
–fc_gt <number>
Specifies that physical disks with free chunklets greater than the number specified
are selected.
–fc_lt <number>
Specifies that physical disks with free chunklets less than the number specified are
selected.
NOTE: The following options, –tc_gt, –tc_lt, –fc_gt, –fc_lt,
–devid and –devtype are used to select the disks that are used to create
common provisioning groups based on the characteristics of the disk.