3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.21
InForm OS Version 2.3.1 Command Line Interface Reference
–sdgs <size> [g|G|t|T]
Specifies the growth increment, the amount of logical disk storage created, on each
autogrow operation. The default growth increment is fixed at 32G, but the minimum
growth increment varies according to the number of controller nodes in the system. If
<size> is non-zero it must be 8G or bigger. A size of 0 disables the auto-grow feature. Size
can be specified in megabytes (default) or in gigabytes by using the
g|G parameter and
terabytes by using the
t|T parameter. To specify the size in gigabytes, enter g or G, for
terabytes, enter
t or T, directly after the specified size (no space). The following table
displays the default and minimum growth increments per number of nodes:
–sdgl <size> [g|G|t|T]
Specifies that the autogrow operation is limited to the specified storage amount that sets
the growth limit. Storage size can be specified in megabytes (default) or in gigabytes by
using the
g|G parameter and terabytes by using the t|T parameter. To specify the size in
gigabytes, enter
g or G, for terabytes, enter t or T, directly after the specified size (no
space). The default size is 0.
–sdgw <size> [g|G|t|T]
Specifies that the threshold of used logical disk space, when exceeded, results in a warning
alert. This sets the growth warning. Size threshold be specified in megabytes (default) or in
gigabytes by using the
g|G parameter and terabytes by using the t|T parameter. To specify
the size in gigabytes, enter
g or G, for terabytes, enter t or T, directly after the specified
size (no space). The default size is 0.
Table 21-4. Growth Increment Per Number of Nodes
Number of Nodes Default Minimum
1-2 32G 8G
3-4 64G 16G
5-6 96G 24G
7-8 128G 32G