3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.14
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
setcage
DESCRIPTION
The setcage command enables service personnel to set or modify parameters for a drive
cage.
SYNTAX
setcage [subcommand <arg>]... <cage_name>
AUTHORITY
Super, Service
SUBCOMMANDS
position <position>
Sets a description for the position of the cage in the cabinet, where <position> is a
description to be assigned by service personnel (for example,
left-top)
ps <model>
Sets the model of a cage power supply, where <model> is a model name to be assigned to
the power supply by service personnel. This model name appears in the Model column of
the
showcage -d command output.
OPTIONS
None.
SPECIFIERS
<cage_name>
Indicates the name of the drive cage that is the object of the setcage operation.
RESTRICTIONS
Access to all domains is required to run this command.
NOTE: You need access to all domains in order to run this command.