3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.13
InForm OS Version 2.3.1 Command Line Interface Reference
<powersupply_ID>
Specifies the power supply number on the node using either 0 (left side from the rear of
the node) or
1 (right side from the rear of the node).
<battery_ID>
Specifies the battery number on the power supply where 0 is the first battery.
RESTRICTIONS
Access to all domains is required to run this command.
EXAMPLES
The following example resets the battery test log and the recharging time for a newly installed
battery on node
2, power supply 1, and battery 0, with an expiration date of July 4, 2010:
NOTES
To view battery status information, issue the showbattery command. See page 22.8 for
information about the
showbattery command.
NOTE: The <powersupply_ID> and <battery_ID> specifiers can be obtained
from the output of the
showbattery command.
cli% setbattery -x 07/04/2010 2 1 0