3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.3
InForm OS Version 2.3.1 Command Line Interface Reference
COMMAND
setalert
DESCRIPTION
The setalert command sets the status of system alerts.
SYNTAX
setalert new|ack|fixed {<alert_ID>...|–a}
AUTHORITY
Super, Service
OPTIONS
–a
Specifies that the status of all alerts be set to new, acknowledged (ack), or fixed. If not
specified, the
<alert_ID> specifier must be specified on the command line.
SPECIFIERS
<alert_ID>...
Specifies that the status of a specific alert be set. This specifier can be repeated to indicate
multiple specific alerts. Up to 99 alerts can be specified in one command. If not specified,
the
-a option must be specified on the command line.
new|ack|fixed
Specifies that the alert(s), as indicated with the <alert_ID> specifier or with option –a,
be set as
new, acknowledged (ack), or fixed.
RESTRICTIONS
Access to all domains is required to run this command.
NOTE: You need access to all domains in order to run this command.