3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

20.6
Command Line Interface Reference InForm OS Version 2.3.1
copy
Copies all active VLUNs from the specified source port (as specified with <src_N:S:P>)
from host WWNs or iSCSI names matching the specified pattern
(
<WWN_or_iSCSI_name_pattern>) to the destination port (as specified with
<dest_N:S:P>). If necessary, the port is reset to target mode.
OPTIONS
–f
Specifies that the command is forced. If this option is not used, the command requires
confirmation before proceeding with its operation.
SPECIFIERS
<N:S:P>
Specifies the host to be removed which is visible to the specified port. This specifier can only
be used with the
remove subcommand.
<WWN_or_iSCSI_name>
Specifies a host’s World Wide Name (WWN). This specifier can only be used with the
remove and copy subcommands. When used with the remove subcommand, this specifier
can be repeated.
<WWN_or_iSCSI_name_pattern>
Specifies that the indicated WWN or iSCSI name is treated as a glob-style pattern. See Glob-
Style Pattern on page 2.4 for more information.
<src_N:S:P>
Specifies the source port when exporting VLUNs. This specifier can only be used with the
copy subcommand.
<dest_N:S:P>
Specifies the destination port when exporting VLUNs. This specifier can only be used with
the
copy subcommand.
RESTRICTIONS
■ Access to all domains is required to run this command.
■ If the <WWN_or_iSCSI_name> specifier is not issued with the remove subcommand, all
inactive hosts on the specified port and their LUNs are removed.