3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)
20.5
InForm OS Version 2.3.1 Command Line Interface Reference
COMMAND
servicehost
DESCRIPTION
The servicehost command executes removal and replacement actions for a host connecting
to an InServ Storage Server port.
SYNTAX
The syntax for the servicehost command can be one of the following:
■ servicehost list
■ servicehost remove [-f] [<N:S:P> [<WWN_or_iSCSI_name>...]]
■ servicehost copy [-f] <src_N:S:P> <WWN_or_iSCSI_name_pattern>
<dest_N:S:P>
AUTHORITY
Super, Service
Can vary for each subcommand as noted in the following section.
SUBCOMMANDS
list
Displays a list of hosts, ports, and Virtual Volume Logical Unit Numbers (VLUNs) for all
inactive hosts. Permitted for all users.
remove
Removes an inactive host, as specified with the <WWN_or_iSCSI_name> specifier, from the
indicated port (
<N:S:P>) and its associated VLUNs. If the <WWN_or_iSCSI_name>
specifier is not issued with the
remove subcommand, all inactive hosts on the specified port
and their LUNs are removed. If the
<N:S:P> specifier is not used with the remove
subcommand, all inactive hosts in the system and their LUNs are removed. See Restrictions
on page 20.6 for additional information about the
remove subcommand.
NOTE: You need access to all domains in order to run this command.