3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

20.3
InForm OS Version 2.3.1 Command Line Interface Reference
resetfc
◆ For DC1 and DC3 drive cages, soft resets the FC-AL module.
◆ For DC2 and DC4 drive cages, resets the cage. FC-AL specifier is ignored.
hresetfc
◆ For DC1 and DC3 drive cages, hard reset the FC-AL module.
◆ For DC2 and DC4 drive cages, hard reset the cage. FC-AL specifier is ignored.
remove
Removes the indicated drive cage (indicated with the <cage_name> specifier) from the
system. If this subcommand is used, the
a|b or 0|1 port specifier is not required. This
command fails when the cage has active ports or is in use. Only permitted for a Super user.
clearlog
◆ For DC2 and DC4 drive cages, clear the log in the cage. FC-AL specifier is ignored.
◆ For DC3 drive cages, clearlog is not supported.
OPTIONS
–f
Forces the operation. When this option is not used, the command requires confirmation
before proceeding.
–ovrd
Forces the specified physical disk path offline even if it is the last remaining path.
SPECIFIERS
a|b
Specifies the side of the specified DC1 or DC3 drive cage to be serviced. This specifier is not
required.
0|1
Specifies the side of the specified DC2 or DC4 drive cage to be serviced. This specifier is not
required.
<cage_name>
Specifies the name of the drive cage to be serviced.