3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

19.39
InForm OS Version 2.3.1 Command Line Interface Reference
COMMAND
removevlun
DESCRIPTION
The removevlun command removes a Virtual Volume’s (VVs) SCSI Logical Unit Number (LUN)
export definition from the system.
SYNTAX
The syntax for the removevlun command can be one of the following:
■ removevlun [options] <VV_name | VV_set> <LUN>
<N:S:P> | <host_name | host_set>
■ removevlun [options] <VV_name | VV_set> <LUN>
<host_name | host_set> <N:S:P>
■ removevlun [options] <VV_name | VV_set> <LUN>
<N:S:P> <host_name | host_set>
AUTHORITY
Super, Edit
OPTIONS
–novcn
Specifies that a VLUN Change Notification (VCN) not be issued after removal of the VLUN.
◆ For direct connect or loop configurations, a VCN consists of a Fibre Channel Loop
Inititalization Primitive (LIP).
◆ For fabric configurations, a VCN consists of a Registered State Change Notification
(RSCN) that is sent to the fabric controller.
–pat
Specifies that the <VV_name>, <LUN>,< N:S:P>, and <host_name> specifiers are treated
as glob-style patterns and that all VLUNs matching the specified pattern are removed. By
default, confirmation is required to proceed with the command unless the
–f option is
specified.
–dr
Specifies that the operation is a dry run and no VLUNs are removed.