3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

19.29
InForm OS Version 2.3.1 Command Line Interface Reference
a:a
Removes all spare chunklets that are not currently used.
–pos <cage:mag:disk:chunklet_num>
Specifies the position of a specific chunklet identified by its position in a drive cage,
drive magazine, physical disk, and chunklet number. For example
–pos
1:0.2:3:121
, where 1 is the drive cage, 0.2 is the drive magazine, 3 is the physical
disk, and
121 is the chunklet number.
–pos <cage:mag:disk:a>
Specifies that all chunklets on a physical disk, identified by drive cage number, drive
magazine number, and disk number, are marked to be removed.
RESTRICTIONS
Access to all domains is required to run this command.
EXAMPLES
The following example removes a spare chunklet from position 3 on physical disk 1:
NOTES
■ Verify the removal of spare chunklets by issuing the showspare command. See showspare
[-used] on page 22.166 for more information.
■ If a wildcard (a) is used or the -p flag is specified, prints the number of spares removed.
Otherwise, if all the explicitly specified spares could not be removed, prints an error
message.
cli% removespare 1:3