3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

19.17

InForm OS Version 2.3.1 Command Line Interface Reference

SPECIFIERS

<LD_name>

Specifies the LD name, using up to 31 characters. Multiple LDs can be specified.

Specifies a glob-style pattern. Multiple LDs can be specified. If this specifier is not used, the

<LD_name> specifier must be used. See Glob-Style Pattern on page 2.4 for more

information.

RESTRICTIONS

■ System resource LDs are required for correct operation of the InServ Storage Server.

Removal of system resource LDs should be performed by qualified service personnel.

Incorrect use of the

-rmsys option can result in data loss.

■ If the LD is mapped to a virtual volume, the LD is not removed and the command stops at

that logical disk.

■ Issuing the removeld command with the –pat option specified returns a request for

confirmation to remove LDs, unless the

–f option is specified.

■ Do not issue the removeld command while a movech, movech2spare, movepd2spare,

moverelocpd operation is being executed. Issue the showldch command to view

operations currently running on the system. See showldch on page 22.66 for additional

information.

EXAMPLES

The following example removes LD test0:

NOTES

Verify the removal of LDs by issuing the showld command. See showld on page 22.58 for

additional information.

cli% removeld –f

test0