3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

19.16
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
removeld
DESCRIPTION
The removeld command removes a specified Logical Disk (LD) from the system service group.
SYNTAX
removeld [options] {<LD_name>|<pattern>}...
AUTHORITY
Super, Service, Edit
OPTIONS
–pat
Specified patterns are treated as glob-style patterns and all LDs matching the specified
pattern are removed. By default, confirmation is required to proceed with the command
unless the
–f option is specified. This option must be used if the pattern specifier is used.
–dr
Specifies that the operation is a dry run and no LDs are removed.
–f
Specifies that the command is forced. If this option is not used, the command requires
confirmation before proceeding with its operation.
–rmsys
Specifies that system resource LDs such as logging LDs and preserved data LDs are removed.
See the InForm OS Concepts Guide for information on logging logical disks and preserved
data logical disks.
CAUTION: System resource logical disks are required for correct operation of the
InServ storage system. Removal of system resource logical disks should be
performed by qualified service personnel. Incorrect use of the
–rmsys option can
result in data loss.