3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

17.19
InForm OS Version 2.3.1 Command Line Interface Reference
RESTRICTIONS
Access to all domains is required to run this command.
EXAMPLE
The following example displays the movement of VV vv1 to domain SampleDomain:
The following example displays the removal of the host
testhost from any domain:
NOTES
■ The movetodomain command moves all objects that are directly or indirectly related to
the specified object into the specified domain. Possible relationships include, but are not
limited to, Virtual Volume Logical Unit Numbers (VLUNs) between hosts and VVs, VVs using
a CPG for snapshot space, and two VVs sharing the same logical disk. If the
-f option is
not used, a list of all objects that will be modified is shown before the confirmation
prompt.
■ Only hosts are permitted to be members of domain sets.
cli% movetodomain -vv vv1 SampleDomain
The following volumes will have their domain modified:
vv1
The following hosts will have their domain modified:
thehost
The following CPGs will have their domain modified:
SampleCPG
14 associated LDs will also have their domain changed.
Do you want to proceed with moving the above to domain SampleDomain?
select y=yes n=no: y
cli% movetodomain -host testhost -unset
The following hosts will have their domain modified:
Id Name Persona -WWN/iSCSI_Name- Port
2 testhost Generic
Do you want to proceed with removing the domain of the above?
select y=yes n=no: y