3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

17.15
InForm OS Version 2.3.1 Command Line Interface Reference
Disks that satisfy all of the specified characteristics are used. For example -p -fc_gt 60
-fc_lt 230 -nd 2
specifies all the disks that have greater than 60 and less than 230 free
chunklets and that are connected to node 2 through their primary path.
SPECIFIERS
<fd>[–<td>]...
Specifies that the chunklets that were relocated from specified disk (<fd>), are moved to
the specified destination disk (
<td>). If destination disk (<td>) is not specified then the
chunklets are moved back to original disk (
<fd>). The <fd> specifier is not needed if -p
option is used, otherwise it must be used at least once on the command line. If this specifier
is repeated then the operation is performed on multiple disks.
RESTRICTIONS
Access to all domains is required to run this command.
EXAMPLES
The following example moves chunklets that were on PD 8 that were relocated to another
position, back to PD
8:
The columns in the previous example are identified as follows:
■ Status. The overall status of the move.
◆ normal. Indicates the chunklet has successfully moved with no loss of quality.
◆ degraded. Indicates the chunklet has successfully moved with loss of quality.
◆ failed. Indicates the chunklet was not moved.
cli% moverelocpd 8
Are you sure you want to move the chunklets ?
select q=quit y=yes n=no: y
Move -Status- -Detailed_State-
42:51-8:2 normal normal
62:50-8:1 normal normal
62:53-8:4 normal normal
62:57-8:7 normal normal
64:49-8:0 normal normal
88:52-8:3 normal normal
88:55-8:6 normal normal
90:55-8:5 normal normal