3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

17.13
InForm OS Version 2.3.1 Command Line Interface Reference
-nd <item>
Specifies one or more nodes. Nodes are identified by one or more integers (item).
Multiple nodes are separated with a single comma (e.g.
1,2,3). A range of nodes is
separated with a hyphen (e.g.
0-7). The primary path of the disks must be on the
specified node(s).
-st <item>
Specifies one or more PCI slots. Slots are identified by one or more integers (item).
Multiple slots are separated with a single comma (e.g.
1,2,3). A range of slots is
separated with a hyphen (e.g.
0-7). The primary path of the disks must be on the
specified PCI slot(s).
-pt <item>
Specifies one or more ports. Ports are identified by one or more integers (item).
Multiple ports are separated with a single comma (e.g.
1,2,3). A range of ports is
separated with a hyphen (e.g.
0-4). The primary path of the disks must be on the
specified port(s).
-cg <item>
Specifies one or more drive cages. Drive cages are identified by one or more integers
(
item). Multiple drive cages are separated with a single comma (e.g. 1,2,3). A
range of drive cages is separated with a hyphen (e.g.
0-3). Disks must reside in the
specified drive cage(s).
-mg <item>
Specifies one or more drive magazines. The 1. or 0. displayed in the CagePos
column of
showpd output indicating the side of the cage is omitted when using
-mg option. Drive magazines are identified by one or more integers (item). Multiple
drive magazines are separated with a single comma (e.g.
1,2,3). A range of drive
magazines is separated with a hyphen (e.g.
0-7). Disks must reside in the specified
drive magazine(s).
-pn <item>
Specifies one or more disk positions within a drive magazine. Disk positions are
identified by one or more integers (
item). Multiple disk positions are separated
with a single comma (e.g. 1,2,3). A range of disk positions is separated with a
hyphen (e.g.
0-3). Disks must reside in the specified position(s).