3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

17.12
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
moverelocpd
DESCRIPTION
The moverelocpd command moves chunklets that were on a physical disk to the target of
relocation.
SYNTAX
moverelocpd [options] [<fd>[–<td>...]
AUTHORITY
Super, Service
OPTIONS
–nowait
Specifies that the command returns before the operation is completed.
-dr
Specifies that the operation is a dry run. No physical disks are actually moved.
–partial
Move as many chunklets as possible. If this option is not specified, the command fails if not
all specified chunklets can be moved.
–f
Specifies that the command is forced. If this option is not used, the command requires
confirmation before proceeding with its operation.
-p <pattern>
Specifies a pattern to select <fd> disks. The <td> specifier cannot be used with this -p
option. If no
<fd> are specified, then all disks that match the pattern are selected as the
<fd> disks. If <fd> disks are specified along with -p then only disks that match the pattern
are selected as
<fd> disk. The following arguments can be specified as patterns for this
option:
NOTE: You need access to all domains in order to run this command.