3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

16.4
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
locatesys
DESCRIPTION
The locatesys command helps locate a storage system by blinking the node status LEDs on
all nodes of a storage system alternating between amber and green. By default, the LEDs in all
connected cages are also set as amber or oscillating (depending on the cage).
SYNTAX
locatesys [options <arg>]
AUTHORITY
Super, Service
OPTIONS
–t <seconds>
Specifies the number of seconds to blink the LEDs. The default is 60 seconds; the maximum
is 255 seconds.
-nodes <node_list>
Specifies a comma-separated list of nodes on which to blink LEDs. The default is all nodes.
-nocage
Specifies that LEDs on the drive cages should not blink. The default is to blink LEDs for all
cages in the system.
SPECIFIERS
None.
RESTRICTIONS
Access to all domains is required to run this command.
NOTE: You need access to all domains in order to run this command.