3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

15.24
Command Line Interface Reference InForm OS Version 2.3.1
–slots <slot_list>
Specifies that only exports from the specified slots are to be displayed. The slot list is
specified as a series of integers separated by commas (
1,2,3). The list can also consist of a
single integer (
1). If the slot list is not specified, all disks on all slots are displayed.
–ports <port_list>
Specifies that only exports to the specified ports are to be displayed. The port list is
specified as a series of integers separated by commas (
1,2,3). The list can also consist of a
single integer (
1). If the port list is not specified, all disks on all ports are displayed.
–lw
Lists the host’s World Wide Name (WWN) or iSCSI name. This is especially useful when
multiple WWNs or iSCSI names belonging to the same host are visible on the same port.
-domainsum
Specifies that sums for VLUNs are grouped by domain in the display. All VLUNs to unnamed
hosts are added and displayed as a single set of data with a
- host name.
–vvsum
Specifies that sums for VLUNs of the same VV are displayed.
–hostsum
Specifies that sums for VLUNs are grouped by host in the display. All VLUNs to unnamed
hosts are added and displayed as a single set of data with a nameless host.
–metric both|time|size
Selects which metric to display. Metrics can be one of the following:
◆ both - (Default) Displays both I/O time and I/O size histograms.
◆ time - Displays only the I/O time histogram.
◆ size - Displays only the I/O size histogram.
–timecols <fcol> <lcol>
For the I/O time histogram, show the columns from the first column <fcol> through last
column <lcol>. The available columns range from 0 through 31.
◆ The first column (<fcol>) must be a value greater than or equal to 0, but less than the
value of the last column (
<lcol>) (default value of 6).
◆ The last column (<lcol>) must be less than or equal to 31 (default value of 15).