3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

15.18
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
histport
DESCRIPTION
The histport command displays a histogram of service times for ports within the system.
SYNTAX
histport [options <arg>]
AUTHORITY
Super, Service, Edit, Browse
OPTIONS
–both|–ctl|–data
Specifies that both control and data transfers are displayed (–both), only control transfers
are displayed (
–ctl), or only data transfers are displayed (–data). If this option is not
specified, only data transfers are displayed.
–nodes <node_list>
Specifies that the display is limited to specified nodes and Physical Disks (PDs) connected to
those nodes. The node list is specified as a series of integers separated by commas (
1,2,3).
The list can also consist of a single integer (
1). If the node list is not specified, all disks on all
nodes are displayed.
–slots <slot_list>
Specifies that the display is limited to specified PCI slots and PDs connected to those PCI
slots. The slot list is specified as a series of integers separated by commas (
1,2,3). The list
can also consist of a single integer (
1). If the slot list is not specified, all disks on all nodes
are displayed.
–ports <port_list>
Specifies that the display is limited to specified ports and PDs connected to those ports.
The port list is specified as a series of integers separated by commas (
1,2,3). The list can
also consist of a single integer (
1). If the port list is not specified, all disks on all nodes are
displayed.