3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

15.14
Command Line Interface Reference InForm OS Version 2.3.1
–cg <item>
Specifies one or more drive cages. Drive cages are identified by one or more integers
(
<item>). Multiple drive cages are separated with a single comma (1,2,3). A range
of drive cages is separated with a hyphen (
0–3). The specified drive cage(s) must
contain disks.
–mg <item>
Specifies one or more drive magazines. The 1. or 0. displayed in the CagePos
column of
showpd output indicating the side of the cage is omitted when using
-mg option. Drive magazines are identified by one or more integers (<item>).
Multiple drive magazines are separated with a single comma (
1,2,3). A range of
drive magazines is separated with a hyphen (
0–3). The specified drive magazine(s)
must contain disks.
–pn <item>
Specifies one or more disk positions within a drive magazine. Disk positions are
identified by one or more integers (
<item>). Multiple disk positions are separated
with a single comma (
1,2,3). A range of disk positions is separated with a hyphen
(
0–3). The specified position(s) must contain disks.
–dk <item>
Specifies one or more physical disks. Disks are identified by one or more integers
(
<item>). Multiple disks are separated with a single comma (1,2,3). A range of
disks is separated with a hyphen (
0–3). Disks must match the specified ID(s).
–tc_gt <number>
Specifies that physical disks with total chunklets greater than the number specified
are selected.
–tc_lt <number>
Specifies that physical disks with total chunklets less than the number specified are
selected.
NOTE: The following arguments, –tc_gt, –tc_lt, –fc_gt, –fc_lt, –devid,
and
–devtype are used to limit the disks that are used to create logical disks
based on the characteristics of the disk drive.