3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

14.10
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
growavv
DESCRIPTION
This command was deprecated in the 2.2.4 release and will be changed or removed in a future
release. Please use the
growvv command in the future. If virtual volumes were created with
deprecated commands then only deprecated commands can be used to modify virtual
volumes.
The
growavv command enlarges a Virtual Volume (VV) with automatic mapping to the Logical
Disks (LDs).
SYNTAX
growavv [options] <VV_name> <user_LD_ID> <LD_size> <sa_LD_ID>
<admin_size> <sd_LD_ID> <snap_size>
AUTHORITY
Super, Edit
OPTIONS
–verbose on|off
Specifies that verbose output is either enabled (on) or disabled (off). If not specified,
verbose output is disabled.
–dr
Specifies that the command is a dry run and that no logical disks or virtual volumes are
actually created.
SPECIFIERS
<VV_name>
Specifies the virtual volume name, using up to 31 characters.
NOTE: You need access to all domains in order to run this command.