3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

12.4
Command Line Interface Reference InForm OS Version 2.3.1
RESTRICTIONS
■ Access to all domains is required to run this command.
■ Functionality of this command requires a 3PAR Remote Copy license. Contact your local
service provider for more information.
■ This command cannot be used to remove the last link of a target system with started
groups.
■ This command terminates with a list of one or more links to be dismissed.
EXAMPLES
The following example removes the link from node 1 of System2:
NOTES
■ See the Remote Copy User’s Guide for more examples and for recommended link naming
conventions.
■ IP targets are made up of pairs composed of the node, slot, and port of the Ethernet port
on the local system and an IP address of the peer port on the target system.
■ FC targets are made up of sets with the node, slot, and port of the fibre channel port on
the local system and a WWN of the peer port on the target system.
cli% dismissrcopylink System2 1:193.1.2.11