3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

11.81
InForm OS Version 2.3.1 Command Line Interface Reference
<LUN>
Specifies the LUN as an integer from 0 through 16383. Alternatively <n>+ can be used to
indicate a LUN should be auto assigned, but be a minimum of
n, or n-m to indicate that a
LUN should be chosen in the range
n to m. In addition the keyword auto may be used and
is treated as
0+.
<host_name>
Specifies the host where the LUN is exported, using up to 31 characters.
<host_set>
Specifies the host set where the LUN is exported, using up to 31 characters.
<N:S:P>
Specifies the system port of the virtual LUN export.
node
Specifies the system port, where the node is a number between 0 and 7.
slot
Specifies the PCI bus slot in the node, where the slot is a number between 0 and 5.
port
Specifies the port number on the FC card, where the port number between 1 and 4.
RESTRICTIONS
None.
EXAMPLES
The following example exports VV test on LUN 2:
NOTES
■ If a volume is already exported as a VLUN, you will be prompted for confirmation if a new
export of the same volume is attempted.
■ The host and port can both be supplied when issuing this command (matched set). This is
the most restrictive access as both the host name and port must match before access to the
VLUN is granted.
cli% createvlun test 2 testhost