3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

11.64
Command Line Interface Reference InForm OS Version 2.3.1
–dk <item>
Specifies one or more physical disks. Disks are identified by one or more integers
(
item). Multiple disks are separated with a single comma (1,2,3). A range of disks
is separated with a hyphen (
0–3). Disks must match the specified ID(s).
–tc_gt <number>
Specifies that physical disks with total chunklets greater than the number specified
are selected.
–tc_lt <number>
Specifies that physical disks with total chunklets less than the number specified are
selected.
–fc_gt <number>
Specifies that physical disks with free chunklets greater than the number specified
are selected.
–fc_lt <number>
Specifies that physical disks with free chunklets less than the number specified are
selected.
–devid <model>
Specifies that physical disks identified by their models are selected. Models can be
specified in a comma-separated list. Models can be displayed by issuing the
showpd
-i
command.
–devtype <type>
Specifies that physical disks must have the specified device type (FC for Fibre
Channel,
NL for Nearline, or SSD for Solid State Drive) to be used. Device types can
be displayed by issuing the showpd command. If it is not specified, the default
device type is
FC.
NOTE: The following arguments, –tc_gt, –tc_lt, –fc_gt, –fc_lt, –devid,
and
–devtype are used to limit the disks that are used to create LDs based on the
characteristics of the disk drive.