3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

11.57
InForm OS Version 2.3.1 Command Line Interface Reference
a:<chunklet_num>
Specifies a chunklet number on all physical disks. This specifier can be repeated.
–pos <cage:mag:disk:chunklet_num>
Specifies the position of a specific chunklet identified by its position in a drive cage,
drive magazine, physical disk, and chunklet number. This specifier can be repeated.
–pos <cage:mag:disk:a>
Specifies that all chunklets on a physical disk, identified by drive cage number, drive
magazine number, and physical disknumber, are marked spare. This specifier can be
repeated.
RESTRICTIONS
Access to all domains is required to run this command.
EXAMPLES
■ The following example marks chunklet 1 as spare for physical disk 15:
■ The following example specifies the position in a drive cage, drive magazine, physical disk,
and chunklet number.
–pos 1:0.2:3:121, where 1 is the drive cage, 0.2 is the drive
magazine,
3 is the physical disk, and 121 is the chunklet number.
NOTES
To verify the creation of a spare chunklet, issue the showspare command. See showspare [-
used] on page 22.166 for more information.
cli% createspare 15:1
cli% createspare –pos 1:0.2:3:121