3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

11.51
InForm OS Version 2.3.1 Command Line Interface Reference
<node:slot:port:IP_address>
Specifies the node, slot, and port of the Ethernet port on the local system and an IP address
of the peer port on the target system.
<node:slot:port:WWN>
Specifies the node, slot, port of the Fibre Channel port on the local system and a World
Wide Name (WWN) address on the target system.
RESTRICTIONS
■ Access to all domains is required to run this command.
■ Functionality of this command requires the 3PAR Remote Copy license. Contact your local
service provider for more information.
EXAMPLES
The following example sets up IP targets and links on System2 (target name), node 0 and
node 1. The IP addresses specify the addresses on the target system:
The following example sets up FC targets and links to
System2 (target name), node 0 and
node 1:
NOTES
■ An earlier version of this command provided the options primary and secondary for
setting active and backup systems. These options were deprecated in InForm OS release
2.2.3.
■ IP targets are made up of pairs composed of the node, slot, and port of the ethernet port
on the local system and an IP address of the peer port on the target system.
■ FC targets are made up of sets with the node, slot, and port of the FC port on the local
system and WWN of the peer port on the target system.
cli% creatercopytarget System2 IP 0:193.1.1.11 1:193.1.2.11
cli%creatercopytarget System2 FC 2FF70002AC0000C3 0:1:1:20210002AC0000C3
1:3:2:21210002AC0000C3