3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

11.50
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
creatercopytarget
DESCRIPTION
The creatercopytarget command creates a Remote Copy target definition.
SYNTAX
The syntax for the creatercopytarget command can be one of the following:
■ Syntax for Remote Copy over IP (RCIP) is as follows:
creatercopytarget [options] <target_name> IP
[<node:slot:port:IP_address>...]
■ Syntax for Remote Copy over Fibre Channel (RCFC) is as follows:
creatercopytarget [options] <target_name> FC <node_WWN>
[<node:slot:port:WWN>...]
AUTHORITY
Super, Edit
OPTIONS
-disabled
Create the target in disabled mode.
SPECIFIERS
<target_name>
The name of the target definition to be created, specified by using up to 31 characters. See
the Remote Copy User’s Guide for suggested target naming conventions.
<node_WWN>
The system’s node World Wide Name (WWN) on the target system (Fibre Channel target
only).
NOTE: You need access to all domains in order to run this command.