3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

11.46
Command Line Interface Reference InForm OS Version 2.3.1
–cpsd <CPG_name>
Adds this logical disk to the specified CPG SD space.
–cpsa <CPG_name>
Adds this logical disk to the specified CPG SA space. Only RAID-1 logical disks may be used
for the SA space.
–ha port|cage|mag
Defines the availability of the logical disk. The default is cage. The availability setting is
used to select the destination chunklets during relocation of failed chunklets.
-domain <domain>
Creates the logical disk in the specified domain. The default is to create it in the current
domain, or no domain if the current domain is not set.
SPECIFIERS
<LD_name>
Specifies the logical disk name, using up to 31 characters.
<RAID_type>
Specifies the RAID type: 0 for RAID-0, 1 for RAID -1, 5 for RAID-5, or 6 for RAID-6.
<row_size>
Specifies the number of sets in a row.
<PD:ch>
Lists PDs and chunklet pairs.
RESTRICTIONS
None.
EXAMPLES
None.
NOTES
■ Verify the creation of a logical disk by issuing the showld command. See showld on
page 22.58 for more information.