3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

11.41
InForm OS Version 2.3.1 Command Line Interface Reference
-persona <hostpersonaval>
Sets the host persona that specifies the personality for all ports which are part of the host
set. This selects certain variations in SCSI command behavior which certain operating
systems expect. The
<hostpersonaval> is the host persona ID number with the desired
capabilities. These can be seen with
showhost -listpersona.
-loc <location>
Specifies the host’s location.
-ip <IP_address>
Specifies the host’s IP address.
-os <OS>
Specifies the operating system running on the host.
-model <Model>
Sets the host’s model.
-contact <contact>
Sets the owner of the host and contact information.
-comment <comment>
Specifies any additional information for the host.
SPECIFIERS
<host_name>
Specifies the name of the host, using up to 31 characters.
<WWN>
Specifies the World Wide Name (WWN) to be assigned or added to an existing host. This
specifier can be repeated to specify multiple WWNs. This specifier is optional.
<iSCSI_name>
Host iSCSI name to be assigned or added to a host. This specifier is optional.
RESTRICTIONS
Access to all domains is required to run this command.