3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

11.12
Command Line Interface Reference InForm OS Version 2.3.1
–tc_gt <number>
Specifies that PDs with total chunklets greater than the number specified be
selected.
–tc_lt <number>
Specifies that PDs with total chunklets less than the number specified are selected.
–fc_gt <number>
Specifies that physical disks with free chunklets greater than the number specified
are selected.
–fc_lt <number>
Specifies that physical disks with free chunklets less than the number specified are
selected.
–devid <model>
Specifies that physical disks identified by their models are selected. Models can be
specified in a comma-separated list. Models can be displayed by issuing the
showpd
-i
command.
–devtype <type>
Specifies that physical disks must have the specified device type (FC for Fibre
Channel or
NL for Nearline, or SSD for Solid State Drive) to be used. Device types can
be displayed by issuing the
showpd command. If it is not specified, the default
device type is
FC.
NOTE: The following arguments, –tc_gt, –tc_lt, –fc_gt, –fc_lt, –devid,
and
–devtype are used to limit the disks that are used to create logical disks
based on the characteristics of the disk drive.