3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

10.14
Command Line Interface Reference InForm OS Version 2.3.1
–c <cage_name>
If using a private loop topology, a Loop Initialization Primitive (LIP) command is issued
from the port. If a cage is specified using the
<cage_name> argument, the LIP is issued
through the cage controller.
◆ If using a point-to-point topology, the link is reset.
◆ If using a public loop or fabric topology, a Registered State Change Notification
(RSCN) message is issued to the fabric controller.
When used with the
rcip ping subcommand:
–c <count>
Specifies the number of replies accepted by the system before terminating the
command. The default is 1; the maximum value is 25.
–f
Specifies that the command is forced. If this option is not used, the command requires
confirmation before proceeding with its operation.
–i
Forces a mode change for a port even if the port’s mode change value is prohibited. The
partner port’s mode is changed with this option as well. Use with the
controlport rst
or
controlport persona commands. This option cannot be used with the -l option.
–w <wait>
Specifies the maximum amount of time to wait for replies. The default is the number of
requested replies plus 5. The maximum value is 30. If a number is not specified, the option
can only be used with the
rcip ping subcommand.
–s <size>
Specifies the packet size. If no size is specified, the option defaults to 64. This option and
argument can only be used with the
rcip ping subcommand.
–pf
Prevents packet fragmentation when issuing the controlport rcip ping command.
This option can only be used with the
rcip ping subcommand.
–unique_nwwn <enable | disable>
Enables or disables the use of a unique node WWN on the specified port.