3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

10.11
InForm OS Version 2.3.1 Command Line Interface Reference
rcip mtu
Sets the Maximum Transfer Unit (MTU) size for the specified Remote Copy interface(s),
overriding the default of 1500. The largest supported value is 9000 and the smallest is 100.
Only for RCIP ports. See Specifiers on page 10.15 for parameters required to issue this
subcommand.
rcip state up|down
Sets the specified Remote Copy interface(s) as either up or down. Only for RCIP ports. See
Specifiers on page 10.15 for parameters required to issue this subcommand.
rcip speed
Instructs the specified Remote Copy interface(s) to use the specified speed and duplex, or to
auto negotiate speed and duplex. The default is
auto. Only for RCIP ports. See Specifiers
on page 10.15 for parameters required to issue this subcommand.
rcip ping
Performs a ping from the specified interface to the specified address. Only for RCIP ports.
See Specifiers on page 10.15 for parameters required to issue this subcommand. Use with
the
–pf option to prevent fragmentation of packets (see Options on page 10.13).
Permitted for Super, Service, Browse, and Edit users.
rcfc init
Sets the specified Remote Copy interface(s) on the local port. Only for RCFC ports.
rcfc delete
Deletes the configuration for the Remote Copy interface on the local port. This will bring
the interfaces down.
intcoal
Enables or disables interrupt coalescing. The specified port will be reset. See Specifiers on
page 10.15 for parameters required to issue this subcommand.