3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

10.6

Command Line Interface Reference InForm OS Version 2.3.1

SPECIFIERS

<cage_name>

Specifies the name of the drive cage. Drive cage information can be viewed by issuing the

showcage command.

Specifies the drive magazine number within the drive cage. Valid formats are

<drive_cage_number>.<drive_magazine> or <drive_magazine> (for example

1.3 or 3, respectively).

RESTRICTIONS

Access to all domains is required to run this command.

EXAMPLES

The following example requests that drive magazine 1 in drive cage cage0 be put on loop:

NOTES

Taking a drive magazine off-loop has the following consequences:

■ Relocation of chunklets.

■ Affected logical disks are put into write-through mode.

■ Momentary dip in throughput, but no loss of connectivity.

cli% controlmag onloop cage0 1