3PAR InForm® OS 2.3.1 CLI Administrator's Manual (320-200180 Rev B, February 2010)

6.17
Managing Host Personas
InForm OS Version 2.3.1 3PAR InForm CLI Administrator’s Manual
Table 6-1 describes the specific functionality for each host persona number. Refer to the 3PAR
InForm OS Configuration Matrix for a list of supported host operating systems.
Table 6-1. Host Persona Settings
Persona
Number
Persona Name Host Operating System
Additional
Capabilities
1 Generic Linux, Windows, and
Solaris
UARepLun, SESLun
2 Generic-ALUA Linux, Windows, and
Solaris
UARepLun, RTPG
SESLun
6 Generic-Legacy Linux, Windows, and
Solaris
None
7 HPUX-Legacy HP-UX VolSetAddr
8 AIX-Legacy AIX NACA
9 Egenera Egenera, NetApp SoftInq
10 NetApp ONTAP Data ONTAP SoftInq
NOTE: Only the Generic, Generic-ALUA, and Generic-Legacy personas are
supported for iSCSI connections.
NOTE: The NetApp host operating system requires unique WWNs for hosts in an
FC fabric.
NOTE: A host device must use either iSCSI or Fibre Channel connections. Mixed
ports on a single device is not supported.