3PAR InForm® OS 2.2.4 Messages and Operator's Guide (320-200119 Rev A, March 2009)

11.12
InForm OS Version 2.2.4
3PAR Confidential
MESSAGE CODE
0x270005
TYPE
CPG growth warning
MESSAGE 1
CPG <cpg name> <SA/SD> space has reached allocation warning of
<number>G.
SUGGESTED ACTION
The logical capacity reserved and in use by the named Common Provisioning Group (CPG) is
above the configured allocation warning. If the named CPG reaches its allocation limit and all
of its reserved space is in use, new writes on TPVVs and/or Snapshot Volumes mapped to this
CPG will result in write failures. Check the configured ‘Allocation Limit’ for the named CPG,
and determine if it needs to be set at a higher limit.
MESSAGE 2
CPG <cpg name> SA space past allocation warning of <number>G.
SUGGESTED ACTION
The logical capacity reserved and in use by the named Common Provisioning Group (CPG) is
above the configured allocation warning. If the named CPG reaches its allocation limit and all
of its reserved space is in use, new writes on TPVVs and/or Snapshot Volumes mapped to this
CPG will result in write failures. Check the configured ‘Allocation Limit’ for the named CPG,
and determine if it needs to be set at a higher limit.
NOTE: There are times when a single allocation results in both the warning and
the limit being hit at the same time. In this case, only the most severe alert is
posted, the limit. For example, if you create a single VV that takes you from <50%
used, to >95% used, only the 95% used alert is generated.