3PAR InForm® OS 2.2.4 CLI Reference (320-200114 Rev A, March 2009)

30.2
Command Line Interface Reference InForm OS Version 2.2.4
COMMAND
upgradecage
DESCRIPTION
The upgradecage command downloads new firmware into the specified cage.
SYNTAX
The syntax for the upgradecage command can be one of the following:
■ upgradecage [options <arg>] <cagename>...
■ upgradecage [options <arg>] -a
AUTHORITY
Service
OPTIONS
–a
Specifies that all drive cages are upgraded with new firmware (<cagename> should not be
specified).
–minlevel <revlevel>
Specifies the minimum firmware level that the cage firmware must be at for the upgrade to
be allowed.
–maxlevel <revlevel>
Specifies the maximum firmware level that the cage firmware must be at for the upgrade
to be allowed.
–model <model>
Only upgrade cages of specified model. Use showcage command to find out the correct
model for the cages. The model can be DC2, DC3, or DC4.
NOTE: You need access to all domains in order to run this command.