3PAR InForm® OS 2.2.4 CLI Reference (320-200114 Rev A, March 2009)

22.9
InForm OS Version 2.2.4 Command Line Interface Reference
The columns in the previous example are identified as follows:
■ Node. The controller node number.
■ PS. The power supply number.
■ Bat. The battery ID.
■ Serial. The battery serial number.
■ State. The current status of the battery. Battery states can be as follows:
◆ --. Cannot determine the battery state.
◆ NotPresent. Battery is missing.
◆ OK. Battery is operating normally.
◆ Failed. Battery is operating abnormally.
◆ MaxLifeLow. Maximum battery life is low (less than 12 minutes).
■
■ ExpDate. The expiration date of the battery.
■ Expired. Indicates whether expired batteries are connected to the power supply.
■ Testing. Indicates whether a battery test is in progress. When a battery test is in progress,
the batteries cannot be counted so the number of batteries shown is a cached value.
The following example displays detailed battery information:
cli% showbattery -d
--------------Node 0 PS 0 Battery 0---------------
Node ID : 0
Power Supply ID : 0
Battery ID : 0
Manufacturer : MAG
Model : 0800-0016-50.0B
Serial Number : 70315366
State : OK
Charge State : FullyCharged
Charge Level(%) : 100
Max Battery Life(mins) : 25
Expired : No
Test in Progress : No
Expiration Date : 2010-07-17 13:00:00 PD
...
ChgLvl. Percentage of battery charge status for the node.