3PAR InForm® OS 2.2.4 CLI Reference (320-200114 Rev A, March 2009)

21.25
InForm OS Version 2.2.4 Command Line Interface Reference
–tc_gt <number>
Specifies that physical disks with total chunklets greater than the number specified
are selected for logical disk creation.
–tc_lt <number>
Specifies that physical disks with total chunklets less than the number specified are
selected for logical disk creation.
–fc_gt <number>
Specifies that physical disks with free chunklets greater than the number specified
are selected for logical disk creation.
–fc_lt <number>
Specifies that physical disks with free chunklets less than the number specified are
selected for logical disk creation.
–devid <ID>
Specifies that physical disks identified by their device IDs are selected for logical disk
creation. Physical disk IDs can be specified in a comma-separated list. Disk IDs can be
shown by issuing the
showpd –i command.
–devtype <FC|NL>
Specifies that physical disks must have the specified device type (FC for Fibre
Channel or
NL for Nearline) to be used for logical disk creation. Device types can be
displayed by issuing the
showpd –i command. When creating a logical disk, all
physical disks used must have the same device type.
-rpm <number>
Disks must be of the specified speed. Device speeds are shown in the K_RPM column
of the showpd -i command.
–sax <LD_name>
Specifies that the logical disk, as identified with the <LD_name> argument, used for
snapshot administration space allocation be removed. The
<LD_name> argument can be
repeated to specify multiple logical disks.
–sdx <LD_name>
Specifies that the logical disk, as identified with the <LD_name> argument, used for
snapshot data space allocation be removed. The <LD_name> argument can be repeated to
specify multiple logical disks.