3PAR InForm® OS 2.2.4 CLI Administrator's Manual (320-200113 Rev A, March 2009)

3.18
Global Options and Environment Variables
3PAR InForm OS CLI Administrator’s Manual InForm OS Version 2.2.4
3 Enter 1 in the Value box.
4 Click OK.
3.2.11.3 Using the -nohdtot Option
To set the -nohdtot or -hafter global option, see the following example:
Substitute
-hafter for -nohdtot in the example above as necessary.
3.2.12 Forcing Commands
A number of CLI commands return confirmation prompts before executing the command
operations. For these commands, an
–f option is provided allowing you to bypass the
confirmation and force the execution of the command. The TPDFORCE environment variable
automatically provides the functionality of the -f option and alleviates the need of having to
specify the
–f option when issuing commands that would otherwise require a confirmation.
The TPDFORCE environment variable is set differently in Solaris and Windows.
3.2.12.1 Setting the TPDFORCE Environment Variable On Solaris
X To set the TPDFORCE environment variable in Solaris, see the following system output
example:
3.2.12.2 Setting the TPDFORCE Environment Variable On Windows
To set the TPDFORCE environment variable in Windows:
1 Perform step 1 through step 4 of the procedure for setting the TPDSOCKSSL environment
variable in Windows as described in 3.2.3 Using SSL on page 3.7.
2 Enter
TPDFORCE in the Variable box.
3 Enter
1 in the Value box.
4 Click OK.
$ cli -nohdtot
$ TPDFORCE=1
$ export
TPDFORCE
$ cli