3PAR InForm® OS 2.2.4 CLI Administrator's Manual (320-200113 Rev A, March 2009)

3.2
Introduction
3PAR InForm OS CLI Administrator’s Manual InForm OS Version 2.2.4
3.3 Stand-alone Commands 3.19
3.4 SSH 3.19
3.1 Introduction
After installing the CLI as described in Chapter 2, Installing the InForm Administration Tools
and setting up a user account (as described in Chapter 4, Managing User Accounts and
Connections) a CLI connection requires the following information:
 System name or IP address
 User name
 Password
You are prompted as follows when running the CLI:
The example above displays the simplest way to connect to the CLI.
In addition to the method described above, you can also:
 Use environment variables and global options to customize the CLI (3.2 Global Options and
Environment Variables on page 3.3).
 Set up a secure connection using SSL (3.2.3 Using SSL on page 3.7).
 Issue stand-alone CLI commands from a shell prompt in Solaris or from a Windows
command prompt (3.3 Stand-alone Commands on page 3.19).
 Use SSH to encrypt all traffic between the client and server, including passwords (3.4 SSH on
page 3.19).
system:
user:
password: