3PAR InForm® OS 2.2.4 CLI Administrator's Manual (320-200113 Rev A, March 2009)

12.3
Viewing Statistics
InForm OS Version 2.2.4 3PAR InForm OS CLI Administrator’s Manual
Additional filters can be used to refine the data output. Refer to the InForm OS Command
Line Reference for complete details about
statpd command options and for sample
command data output.
12.2.2 Viewing Port Statistics
 To view port statistics, issue the statport command.
By default, only statistics for data transfers are displayed. You can optionally display
statistics for control transfers or both data and control transfers by issuing the
statport -ctl or statport -both command, respectively.
Data output can be further refined to display only port statistics from:
 specific nodes.
 specific PCI slots.
 specific port slots.
 host-connected (target) ports.
 disk-connected (initiator) ports.
 Fibre Channel ports (for 3PAR Remote Copy).
 Ethernet ports (for 3PAR Remote Copy).
You can use additional filters to refine the data output. Refer to the InForm OS Command
Line Reference for complete details about
statport command options and for sample
command data output.
12.2.3 Viewing VLUN Statistics
 To view VLUN statistics, issue the statvlun command.
The data output can be further refined to display only VLUN statistics from:
 specific domains.
 specific hosts.
 specific virtual volumes.
 specific LUNs.
 ports from specific nodes, slots, or port slots.